Which positions on the product does BurgerPrints support printing?

Overview

This article explains the print positions BurgerPrints supports for each product type. It helps you understand the designated print areas available across the catalog.

Frequently Asked Questions

Q1: Which print positions does BurgerPrints support?

BurgerPrints supports printing only within the predefined print areas of each product. Common print positions include:

Apparel: Front, back; some models support sleeve printing.
Mugs: One-side, two-side or full wrap (depending on the model).
Blanket/Canvas/Poster: Full front print according to the template.
Ornaments/Plaque/Acrylic: Full front print.
Pillow: Single-side or double-side print.
Tumbler/Water bottle: Full wrap or one-sided print as defined in the template.
Other products: Print areas follow the fixed zones shown in the template or design frame.

Q2: Does BurgerPrints support large print sizes, edge-to-edge printing or neck label printing?

Large print areas (Apparel): Some apparel products support large print zones on the front or back, depending on the product model. In some cases, the print size can be up to 15 x 19 inches. You can check whether a product supports a large print area directly in the product catalog.
Edge-to-edge/full wrap (Mug): Selected mug models support full wrap printing around the mug body.

Note: All print areas must follow the official product template and cannot exceed the safe print zones.

Neck label printing: Currently not supported; may be added in the future.

To check the exact print position on a product, you can:

Visit the Product Catalog: https://burgerprints.com/catalog

Search for the product you want to review

Select the fulfillment provider (printer) you would like to check

Scroll down to the Decorations section to review the size specifications for each print position
Download the official product template (if available) to verify the print area dimensions and safe zones

The template and Decorations section provide detailed information about print placement and size limits to help ensure your design meets production requirements.

Q3: Can I customize the print position however I want?

You can customize the print position within the supported print zone.

Designs cannot be placed outside the fixed print areas shown in the product template or design tool. However, you can freely control the exact position of your design inside that print zone.

How it works:

Each product has a defined print zone, such as a square or rectangular area on the front or back.
Wherever your design is placed inside that zone, it will be printed in the same relative position on the actual product.
Areas of the print zone not covered by your design will remain transparent.

Example:

If a T-shirt supports a 14 x 16 inch front print area, you can place a small design, such as a logo icon, on the left chest area, as long as the entire design stays within the 14 x 16 inch print zone that is positioned on the printable area of the shirt.

Quality notice:

When using Create Product, you can drag and reposition your design within the print zone. However, excessive scaling or repositioning may affect print quality. For best results, please follow the official templates and recommended size guidelines.